Ensure your computer (Windows 10 Version 1709 or Higher Excluding 1709) and the KNAON Y486AP printer are connected to the same Wi-Fi network or network segment.
Installation Steps
1. Access Computer Settings
Open the Start menu and select"Settings".
In the Settings window, choose"Bluetooth & devices".
2. Navigate to Printers & Scanners
Within the "Bluetooth & devices" section, click on"Printers & scanners".
3. Add the Printer Device
Click the"Add device"button.
Ensure the KNAON Y486AP printer is powered on. The computer will detect nearby wireless and Bluetooth devices.
Locate"KNAON Y486AP-XXXX"in the device list and click"Add device"next to it.
4. Open and Configure the Print File
Open the file you want to print(e.g., a PDF label file like "Labels-Sample.pdf").
When the print dialog appears, adjust print parameters:
SelectKNAON Y486APas the printer.
Set paper size (e.g., "North America 4x6"), layout, and other settings as needed and Click the"Print"icon to start printing..
Alternative Method for Installation Failure:
This Wi-Fi driver installation method is not applicable to Windows 10 Version 1709 and below. Additionally, if the above Wi-Fi driver installation fails (e.g., the printer is not detected, installation wizard errors occur), you can manually add the printer via its IP address. For detailed step-by-step instructions, refer to the guide at this link:
