Configuring Y486AP Network via FlashLabel App (Android)

Step 1: Download and Install the FlashLabel App

1. Scan the QR code provided below using your Android device’s camera or a QR code scanner.

    2. Follow the on-screen instructions to download and install the FlashLabel app.

Step 2: Network Configuration

   1. Open Settings

• Launch the FlashLabel app.
• Tap the "Setting" tab (highlighted in red) at the bottom.
  
  

   2. Start Wi-Fi Configuration

• In the Settings menu, select "Wi-Fi Configuration" (red-bordered option).
  
  

   3. Search for Devices

• On the "Connect device" screen, tap "Click to find" (blue button at the bottom).
• Wait for the printer "Y486AP-xxxx" to appear under "Connectable devices".
  
  

   4. Connect to Printer

• Tap the "Connect" button next to "Y486AP-xxx".
• Verify prerequisites:
  ✅ Printer is powered on (green light visible).

   5. Configure Network

• Tap the red-highlighted "Configure Wi-Fi network" button.
• On the configuration screen:
  • Wi-Fi Name: Confirm "Your Wi-Fi Name" (auto-detected).
  • Password: Enter your router’s Wi-Fi password.
• Tap "Configure" (blue button) to finalize.
  
  

   6. Wait for Completion

• The printer will automatically connect to the Wi-Fi network.
• Do not close the app or turn off the printer during this process.
• A confirmation message will appear once the setup is complete.